Request Information
The Gardner Denver Reward Series offers a complete line of compressed air packages that meet any application. The Reward Series has been carefully engineered to stand up to years of use.

Every Reward Series compressor arrives with up to six standard, pre-installed accessories.
Unit of Measure

Specifications

Configuration

 N/A Horizontal

Power

 N/A 15 hp

Variants STD

 N/A CASRSA32

Variants CA

 N/A CASRSA58

Pump Model

 N/A R40A

Voltage (v/ph)

 N/A 230/3

Tank Capacity

 N/A 120H gal

Speed

 N/A 770 rpm

175 PSI Rating CFM Delivery

 N/A 53.7

Length

 N/A 74 in

Width

 N/A 28 in

Height

 N/A 62 in

Approximate Weight

 N/A 1110 lb

Standard Equipment Features

N/A

  • Heavy Duty Two Stage, Splash Lubricated Air Compressor Pump(s)
  • Multi-Finned Cylinders
  • Integral Cylinder Head
  • Intercoolers for Cooling Between Stages
  • Reliable High Flow Disc Valves
  • Oversized Main Bearings
  • Balanced Crankshaft
  • Oil Level Site Glass
  • Centrifugal Unloader for Loadless Starting
  • 0-300 PSIG Air Pressure Gauge
  • Bucket High Drain Valve
  • Factory Fill with AEON™ Lubricants
  • OSHA Approved Belt Guard
  • ASME Code Air Receiver
      – Pressure Relief Valve
      – Service Valve
      – Drain Valve
      – Pressure Gauge
  • U.L. Listed Electrical Components
  • Vertical or Horizontal Configurations
  • Oversize Inlet Filter – Silencers
  • Mounted Magnetic Starter
  • Vibration Isolator Pads
  • Automatic Tank Drain
  • Low Oil Level Monitor
  • Air Cooled Aftercooler
  • Dual Control on 10 HP Simplex and Above

    • Compressor Pump Warranty

    N/A
    Each new Gardner Denver Assembled Unit has a five (5) year warranty on the compressor pump only, against defects in materials or workmanship under normal use and service, from the date of installation or sixty-six (66) months from the date of shipment by Gardner Denver or a Gardner Denver distributor, whichever may occur first.

    The five-year extended warranty covers parts and labor and is prorated over the five years as follows:
    Year One — 100% coverage
    Year Two — 90% coverage
    Year Three — 80% coverage
    Year Four — 70% coverage
    Year Five — 60% coverage

    Head valves are warranted for Year One only. Gardner Denver makes no warranty on components and/or accessories furnished to Gardner Denver by third parties, such as electric motors, gasoline engines and controls. These are warranted only to the extent of the original manufacturer’s warranty to Gardner Denver.
    Includes a five-year warranty on the air receiver, pump and motors.

    U. L. Standards

    N/A Gardner Denver, in common with other major, industrial compressor manufacturers, does not market compressors which are U.L. listed. In general, U.L. is concerned with electrical components that may be utilized on compressor units, rather than a complete compressor package or system.
    All electrical components used on Gardner Denver compressors are U.L. listed. Each component – motor, starter, pressure switch, control panel – carries a U.L. identification mark on the nameplate or inside the electrical enclosure cover. The mark will be the letters “UR” reversed (as if held up to a mirror), indicating the item is “recognized” by U.L.