Request Information
The Champion APL is single stage, two cylinder, pressure lubricated compressors equipped with a two-groove, 17 inch sheave for belt driven applications. The APL have an integrated cooling fan built into the cast iron sheave for maximum cooling.
Unit of Measure

Specifications

Alternate Model Number

 N/A APLGAA APLGBA APLHAA APLHBA

Pressure

 N/A 28 inHg to 60 psig 0.95 to 4.1 bar

Motor Power

 N/A 15 hp11.2 kW

Industry Standards/Certifications

 N/A Compressed Air and Gas Institute (CAGI) Energy Star Partner ISO 9001:2008

Dimensions

Bore Diameter

 N/A 7.875 in200 mm

Stroke

 N/A 3 in76 mm

Suction and Discharge Pipe Size

 N/A 3 in

Inlet Port Design

 N/A NPT

Discharge Port Design

 N/A NPT

Length

 N/A 41 in1041 mm

Width

 N/A 29 in737 mm

Height

 N/A 30 in762 mm

Weight

 N/A 750 lb340 kg

Compressor Specifications

Speed at 15 hp (11.2 kW) Power

 N/A 855 rpm

Pressure at 855 rpm Speed and 15 hp Power

 N/A 20 psig30 psig40 psig50 psig60 psig1.4 bar2.1 bar2.8 bar3.4 bar4.1 bar

Capacity at 20 psig Pressure and 855 rpm Speed

 N/A 113 ft³/min3.2 m³/min

Capacity at 30 psig Pressure and 855 rpm Speed

 N/A 105 ft³/min3.0 m³/min

Capacity at 40 psig Pressure and 855 rpm Speed

 N/A 98 ft³/min2.8 m³/min

Capacity at 50 psig Pressure and 855 rpm Speed

 N/A 90 ft³/min2.5 m³/min

Capacity at 60 psig Pressure and 855 rpm Speed

 N/A 83 ft³/min3.1 m³/min

Vacuum Specifications

Speed at 5 hp (3.7 kW) Power

 N/A 780 rpm

Capacity at 780 rpm Speed and 5 hp Power

 N/A 60 ft³/min92 ft³/min105 ft³/min114 ft³/min120 ft³/min1.7 m³/min2.6 m³/min3.0 m³/min3.2 m³/min3.4 m³/min

Vacuum at 120 ft³/min Capacity and 780 rpm Speed

 N/A 5 inHg127 mmHg

Vacuum at 114 ft³/min Capacity and 780 rpm Speed

 N/A 10 inHg254 mmHg

Vacuum at 105 ft³/min Capacity and 780 rpm Speed

 N/A 15 inHg381 mmHg

Vacuum at 92 ft³/min Capacity and 780 rpm Speed

 N/A 20 inHg508 mmHg

Vacuum at 60 ft³/min Capacity and 780 rpm Speed

 N/A 25 inHg635 mmHg

Vacuum at 780 rpm Speed

 N/A 28 inHg711 mmHg

Lubrication

Lubrication

 N/A
  • Superior lubrication is accomplished through a gear driven oil pump powered by the crankshaft.
  • Pressurized system ensures complete lubrication to the crankshaft, connecting rods, bearings and piston pins.
  • Full flow, spin-on oil filter ensures impurities are removed before the lubricant contacts any internal components.
  • Oil pressure gauge is conveniently mounted to display the oil pressure.

Valves

Valves

 N/A
  • Concentric ring design incorporates both the inlet and outlet valves in one assembly.
  • Designed to give 100% exposure to the air flow for maximum efficiency (i.e. more CFM per HP).
  • Discs and springs are made of AISI 420 stainless steel to give dependable corrosion-free and fatigue-free service life.

Standard Features

Standard Features

 N/A
  1. ASME pressure relief valve protects the intercooler and first stage from over pressure.
  2. Suction unloading valves (where applicable) provide load less starting and stopping as well as quick response to capacity demands.
  3. Removable hand-hole plate allows easy access to the internal running gear.
  4. Tri-Metal insert bearings are two-piece for quick and easy replacement.
  5. Counterbalanced crankshaft assures smooth operation.
  6. Replaceable piston pin bearings are very economical when replacement becomes necessary.
  7. Deep-finned cylinders and heads quickly dissipate the heat of compression.
  8. Crankshaft ends are supported by large tapered roller bearings for smooth operation and long life.
  9. Oil pressure gauge assures the operator of lubrication system integrity.
  10. The cylinders and crankcase are built of industrial strength cast iron materials.
  11. Continuous Operation

Applications

Applications

 N/A Compressor designs optimized for premium service in the following applications:
  • Bulk Material Handling.
  • Engine Starting.
  • Well Head Servicing.
  • Petroleum Refineries.
  • Industrial Spraying.